| #ifdef PLAN9PORT /* SORRY! */ |
| # include <u.h> |
| # include <sys/types.h> |
| # ifdef __linux__ /* REALLY SORRY! */ |
| # define CANBLOCKSIZE 1 |
| # include <sys/vfs.h> |
| # elif defined(__FreeBSD__) |
| # define CANBLOCKSIZE 1 |
| # include <sys/param.h> |
| # include <sys/stat.h> |
| # include <sys/mount.h> |
| # endif |
| #endif |
| #include "stdinc.h" |
| #include <ctype.h> |
| #include "dat.h" |
| #include "fns.h" |
| |
| u32int maxblocksize; |
| int readonly; |
| |
| static int |
| strtoullsuf(char *p, char **pp, int rad, u64int *u) |
| { |
| u64int v; |
| |
| if(!isdigit((uchar)*p)) |
| return -1; |
| v = strtoull(p, &p, rad); |
| switch(*p){ |
| case 'k': |
| case 'K': |
| v *= 1024; |
| p++; |
| break; |
| case 'm': |
| case 'M': |
| v *= 1024*1024; |
| p++; |
| break; |
| case 'g': |
| case 'G': |
| v *= 1024*1024*1024; |
| p++; |
| break; |
| case 't': |
| case 'T': |
| v *= 1024*1024; |
| v *= 1024*1024; |
| p++; |
| break; |
| } |
| *pp = p; |
| *u = v; |
| return 0; |
| } |
| |
| static int |
| parsepart(char *name, char **file, u64int *lo, u64int *hi) |
| { |
| char *p; |
| |
| *file = estrdup(name); |
| if((p = strrchr(*file, ':')) == nil){ |
| *lo = 0; |
| *hi = 0; |
| return 0; |
| } |
| *p++ = 0; |
| if(*p == '-') |
| *lo = 0; |
| else{ |
| if(strtoullsuf(p, &p, 0, lo) < 0){ |
| free(*file); |
| return -1; |
| } |
| } |
| if(*p == '-') |
| p++; |
| if(*p == 0){ |
| *hi = 0; |
| return 0; |
| } |
| if(strtoullsuf(p, &p, 0, hi) < 0 || *p != 0){ |
| free(*file); |
| return -1; |
| } |
| return 0; |
| } |
| |
| Part* |
| initpart(char *name, int mode) |
| { |
| Part *part; |
| Dir *dir; |
| char *file; |
| u64int lo, hi; |
| |
| if(parsepart(name, &file, &lo, &hi) < 0) |
| return nil; |
| trace(TraceDisk, "initpart %s file %s lo 0x%llx hi 0x%llx", name, file, lo, hi); |
| part = MKZ(Part); |
| part->name = estrdup(name); |
| part->filename = estrdup(file); |
| if(readonly){ |
| mode &= (OREAD|OWRITE|ORDWR); |
| mode |= OREAD; |
| } |
| part->fd = open(file, mode); |
| if(part->fd < 0){ |
| if((mode&(OREAD|OWRITE|ORDWR)) == ORDWR) |
| part->fd = open(file, (mode&~ORDWR)|OREAD); |
| if(part->fd < 0){ |
| freepart(part); |
| fprint(2, "can't open partition='%s': %r\n", file); |
| seterr(EOk, "can't open partition='%s': %r", file); |
| fprint(2, "%r\n"); |
| free(file); |
| return nil; |
| } |
| fprint(2, "warning: %s opened for reading only\n", name); |
| } |
| part->offset = lo; |
| dir = dirfstat(part->fd); |
| if(dir == nil){ |
| freepart(part); |
| seterr(EOk, "can't stat partition='%s': %r", file); |
| free(file); |
| return nil; |
| } |
| if(dir->length == 0){ |
| free(dir); |
| freepart(part); |
| seterr(EOk, "can't determine size of partition %s", file); |
| free(file); |
| return nil; |
| } |
| if(dir->length < hi || dir->length < lo){ |
| freepart(part); |
| seterr(EOk, "partition '%s': bounds out of range (max %lld)", name, dir->length); |
| free(dir); |
| free(file); |
| return nil; |
| } |
| if(hi == 0) |
| hi = dir->length; |
| part->size = hi - part->offset; |
| #ifdef CANBLOCKSIZE |
| { |
| struct statfs sfs; |
| if(fstatfs(part->fd, &sfs) >= 0) |
| part->fsblocksize = sfs.f_bsize; |
| } |
| #endif |
| free(dir); |
| return part; |
| } |
| |
| void |
| freepart(Part *part) |
| { |
| if(part == nil) |
| return; |
| if(part->fd >= 0) |
| close(part->fd); |
| free(part->name); |
| free(part); |
| } |
| |
| void |
| partblocksize(Part *part, u32int blocksize) |
| { |
| if(part->blocksize) |
| sysfatal("resetting partition=%s's block size", part->name); |
| part->blocksize = blocksize; |
| if(blocksize > maxblocksize) |
| maxblocksize = blocksize; |
| } |
| |
| /* |
| * Read/write some amount of data between a block device or file and a memory buffer. |
| * |
| * Most Unix systems require that when accessing a block device directly, |
| * the buffer, offset, and count are all multiples of the device block size, |
| * making this a lot more complicated than it otherwise would be. |
| * |
| * Most of our callers will make things easy on us, but for some callers it's best |
| * if we just do the work here, with only one place to get it right (hopefully). |
| * |
| * If everything is aligned properly, prwb will try to do big transfers in the main |
| * body of the loop: up to MaxIo bytes at a time. If everything isn't aligned properly, |
| * we work one block at a time. |
| */ |
| #undef min |
| #define min(a, b) ((a) < (b) ? (a) : (b)) |
| int |
| prwb(char *name, int fd, int isread, u64int offset, void *vbuf, u32int count, u32int blocksize) |
| { |
| char *op; |
| u8int *buf, *tmp, *freetmp, *dst; |
| u32int c, delta, icount, opsize; |
| int r; |
| |
| buf = vbuf; |
| tmp = nil; |
| freetmp = nil; |
| icount = count; |
| opsize = blocksize; |
| |
| if(count == 0){ |
| logerr(EStrange, "pwrb %s called to %s 0 bytes", name, isread ? "read" : "write"); |
| return 0; |
| } |
| |
| assert(blocksize > 0); |
| |
| /* allocate blocksize-aligned temp buffer if needed */ |
| if((ulong)offset%blocksize || (ulong)buf%blocksize || count%blocksize){ |
| if((freetmp = malloc(blocksize*2)) == nil) |
| return -1; |
| tmp = freetmp; |
| tmp += blocksize - (ulong)tmp%blocksize; |
| } |
| |
| /* handle beginning fringe */ |
| if((delta = (ulong)offset%blocksize) != 0){ |
| assert(tmp != nil); |
| if((r=pread(fd, tmp, blocksize, offset-delta)) != blocksize){ |
| dst = tmp; |
| offset = offset-delta; |
| op = "read"; |
| goto Error; |
| } |
| c = min(count, blocksize-delta); |
| assert(c > 0 && c < blocksize); |
| if(isread) |
| memmove(buf, tmp+delta, c); |
| else{ |
| memmove(tmp+delta, buf, c); |
| if((r=pwrite(fd, tmp, blocksize, offset-delta)) != blocksize){ |
| dst = tmp; |
| offset = offset-delta; |
| op = "read"; |
| goto Error; |
| } |
| } |
| assert(c > 0); |
| offset += c; |
| buf += c; |
| count -= c; |
| } |
| |
| /* handle full blocks */ |
| while(count >= blocksize){ |
| assert((ulong)offset%blocksize == 0); |
| if((ulong)buf%blocksize){ |
| assert(tmp != nil); |
| dst = tmp; |
| opsize = blocksize; |
| }else{ |
| dst = buf; |
| opsize = count - count%blocksize; |
| if(opsize > MaxIo) |
| opsize = MaxIo; |
| } |
| if(isread){ |
| if((r=pread(fd, dst, opsize, offset))<=0 || r%blocksize){ |
| op = "read"; |
| goto Error; |
| } |
| if(dst == tmp){ |
| assert(r == blocksize); |
| memmove(buf, tmp, blocksize); |
| } |
| }else{ |
| if(dst == tmp){ |
| assert(opsize == blocksize); |
| memmove(dst, buf, blocksize); |
| } |
| if((r=pwrite(fd, dst, opsize, offset))<=0 || r%blocksize){ |
| op = "write"; |
| goto Error; |
| } |
| if(dst == tmp) |
| assert(r == blocksize); |
| } |
| assert(r > 0); |
| offset += r; |
| buf += r; |
| count -= r; |
| } |
| |
| /* handle ending fringe */ |
| if(count > 0){ |
| assert((ulong)offset%blocksize == 0); |
| assert(tmp != nil); |
| /* |
| * Complicated condition: if we're reading it's okay to get less than |
| * a block as long as it's enough to satisfy the read - maybe this is |
| * a normal file. (We never write to normal files, or else things would |
| * be even more complicated.) |
| */ |
| r = pread(fd, tmp, blocksize, offset); |
| if((isread && r < count) || (!isread && r != blocksize)){ |
| print("FAILED isread=%d r=%d count=%d blocksize=%d\n", isread, r, count, blocksize); |
| dst = tmp; |
| op = "read"; |
| goto Error; |
| } |
| if(isread) |
| memmove(buf, tmp, count); |
| else{ |
| memmove(tmp, buf, count); |
| if(pwrite(fd, tmp, opsize, offset) != blocksize){ |
| dst = tmp; |
| op = "write"; |
| goto Error; |
| } |
| } |
| } |
| if(freetmp) |
| free(freetmp); |
| return icount; |
| |
| Error: |
| seterr(EAdmin, "%s %s offset 0x%llux count %ud buf %p returned %d: %r", |
| op, name, offset, opsize, dst, r); |
| if(freetmp) |
| free(freetmp); |
| return -1; |
| } |
| |
| int |
| rwpart(Part *part, int isread, u64int offset, u8int *buf, u32int count) |
| { |
| u32int blocksize; |
| |
| trace(TraceDisk, "%s %s %ud at 0x%llx", |
| isread ? "read" : "write", part->name, count, offset); |
| if(offset >= part->size || offset+count > part->size){ |
| seterr(EStrange, "out of bounds %s offset 0x%llux count %ud to partition %s size 0x%llux", |
| isread ? "read" : "write", offset, count, part->name, part->size); |
| return -1; |
| } |
| |
| blocksize = part->fsblocksize; |
| if(blocksize == 0) |
| blocksize = part->blocksize; |
| if(blocksize == 0) |
| blocksize = 4096; |
| |
| return prwb(part->filename, part->fd, isread, part->offset+offset, buf, count, blocksize); |
| } |
| |
| int |
| readpart(Part *part, u64int offset, u8int *buf, u32int count) |
| { |
| return rwpart(part, 1, offset, buf, count); |
| } |
| |
| int |
| writepart(Part *part, u64int offset, u8int *buf, u32int count) |
| { |
| return rwpart(part, 0, offset, buf, count); |
| } |
| |
| ZBlock* |
| readfile(char *name) |
| { |
| Part *p; |
| ZBlock *b; |
| |
| p = initpart(name, OREAD); |
| if(p == nil) |
| return nil; |
| b = alloczblock(p->size, 0, p->blocksize); |
| if(b == nil){ |
| seterr(EOk, "can't alloc %s: %r", name); |
| freepart(p); |
| return nil; |
| } |
| if(readpart(p, 0, b->data, p->size) < 0){ |
| seterr(EOk, "can't read %s: %r", name); |
| freepart(p); |
| freezblock(b); |
| return nil; |
| } |
| freepart(p); |
| return b; |
| } |
| |